Epoxy Dome Resin Hard Type AH-7058AB
Description
This product is hard, low viscosity, processability crystal dripped glue;
Room temperature curing or middle temperature curing. Curing speed is moderate;
The product after curing has excellent surface, high hardness, excellent adhesion,
good transparency, etc. properties. If the users want more colors, they may use our Hardener
AH-7058B transparent color paste or opaque color paste.
Application
Suitable for the surface of products, such as various kinds of metal signs, badge, button, handicraft ,etc.;
All other products require sealing, encapsulation, insulating and dampproof electrons or other kinds of
products are used;
Surface encapsulation of other hard quality products;
Characteristics
Type Base Component AH-7058A Hardener AH-7058B
Appearance Colorless Transparent liquid Colorless Transparent liquid
Viscosity 40°C,mpa.s 300-400cps 10-20cps
Density, 25°C,g/cm3 1.05-1.15 0.945-0.975
Mixing Ratio (weight basis) 3 1
Mixture Status
Viscosity 40°C,mpa.s: 180-240cps
Gel Time: 40°C x 2-3 hours
Mixting Ratio (By Weight): AH-7058A : AH-7058B = 3:1
Available Using Time: 40 mins x 25°C (100g scale)
Operation method Resin Preheat |
Preheat AH-7058A at 60°C×60min-90min before using |
Mixture |
Mix evenly preheated AH-7058A and AH-7058B |
Deaeration |
Use vacuum deaerator to eliminate bublle under 45-50°C(1-3torr) |
Sealing |
Use adhesive injecting machine or by hand to inject |
Heat and Cure |
60°C×3hours or 70°C×2hours |
Epoxy Dome Resin Soft Type AH-701AB
Application
Suitable for the surface of products, such as nameplate, scutcheon, pager plate, craftwork and etc.;
All other products require soft surface after treatment.
Characteristics
Type Base Component AH-701A Hardener AH-701B
Appearance Colorless Transparent liquid Colorless Transparent liquid
Viscosity 40°C,mpa.s 200-280cps 10-20cps
Density, 25°C,g/cm3 1.10-1.20 0.965-0.975
Mixing Ratio (weight basis) 3 1
Mixture Status
Viscosity 40°C,mpa.s: 120-150cps
Gel Time: 40°C x 2-3 hours
Mixting Ratio (By Weight): AH-701A : AH-701B = 3:1
Available Using Time: 20 mins x 40°C (100g scale)
Operation method Resin Preheat |
Preheat AH-701A at 60°C×60min-90min before using |
Mixture |
Mix evenly preheated AH-701A and AH-701B |
Deaeration |
Use vacuum deaerator to eliminate bublle under 45-50°C(1-3torr) |
Sealing |
Use adhesive injecting machine or by hand to inject |
Heat and Cure |
60°C×3hours or 70°C×2hours |
Packaging & Shipping:
Generally our products is package into 25kg each bag, but we can make specially package
as customers' demand too.
20 ft container loading: 18Tons
ETD: 10-15 days after the order confirmed.
Our company Hebei Eminent Chemical Technology Co., Ltd is one professional exporter of brush, also we have our own factory, Our products are overall
Our factory produce different kind of brushes, mainly product is below:
Civil brush (including daily use brush, Floor brush, BBQ brush, plastic or wooden handle steel (brass) wire brush, polishing brush)
Industrial brush (including Roller brush, Cleaning brush), Wire Wheel brush, Wire Cup brush etc
Tube brushes(including different material and different models tube brush) etc.
Our company was found in 2008, it depends on its Strong technical force and rich production experience developing much new products continuously. Our products are exported to all over the country, highly appreciated by the customers.
The company because of its high quality, reasonable prices and excellent service winning the trust of customers. All of the staffs will keep humility, self-improvement with more remarkable successes and completely new face to embrace a better future, trust us!
