Shenzhen Jinhua Electronic Materials Co., Ltd. >> Ultra Clear Polyurethane Resin for False Water Making Factory

Ultra Clear Polyurethane Resin for False Water Making Factory

Ultra Clear Polyurethane Resin for False Water Making Factory
Price: US $ 9-12kg
Min Order: 20kg
Pay Type: T/T,Western Union,Paypal
 
Polyurethane 518AB-T
Application
518AB-T is a two components polyurethane system , solvent free, with the mixing ratio of 3:1, can be cured under normal temperature and high temperature, it forms a very high gloss and transparent coating to its applications such as nameplate, signage and decorations, can be special used for false water. After cured, it will has a very good features of UV resistance and weather resistance, will not yellowing for about 3 years for outdoor use.
 
Components
518B-T: Polyhydric alcohol
518A-T: Isocyanate
 
Features
1, With long pot life and fast heat curing to save time.
2, With low viscosity and good natural defoaming, come to a high gloss and bright surface after cured, without ripple.
3, Very high transparency, with good elasticity and bonding strength.
4, With very good weather and UV resistance for outdoor use, can be used at the temperature of -30 ºC to 100 ºC.
 
Properties before Hardening
Part518A-T518B-T
ColorTransparent or light yellowTransparent or light yellow
Viscosity (25ºC mpa·s)250±50CPS400±100 CPS
Mixing ratio A: B = 100:33(weight ratio)
Pot life25ºC×30min
Hardening conditions25 ºC×24H or 65ºC×3.5H or 80ºC×2H
Shelf life(25ºC, sealed)6 Months6 Months
 
Operation
Hand operation process( long pot life and curing slowly):For example: for badge
1, Place 518A-T and 518B-T at the temperature of 15 to 25 ºC, relative humidity lower than 70% for 12hours.
2, Well prepared the products you need to apply the 518AB-T such as the PVC signage/nameplate, metal signage/nameplate, put them into the oven to heat at the temperature of about 60ºC to clear the moisture on the surface.
3, Totally clear the dust and the oil on the surface of the signage/nameplate.
4, Weigh the 518A-T and the 518B-T by 100:33, and fully stir it.
5, Clear the bubbles by vacuum machine(the mixture will not have bubble at the -0.1 vacuum)
6, Take a clean syringe to draw the mixture and drop it to the surface of the well prepared signage/nameplate. Normally the thickness is 2mm.
7, Look at the glue in 5 minutes, if there is some bubbles, use a pin to break the bubbles, or if there is some area that has not been covered by glue, use the pin lead it.
8, Put the finished products in the oven at the temperature of about 60 to 80ºC, it will cured in 2 to 3.5 hours.
 
Properties after Hardening
Test ItemResult
AppearanceTransparent
Hardness, shore A50±5
Tensile strength,MPA>2 
Elongation Ratio, %>200
 
Packing
Steel bucket(25kgs/bucket, 100kgs per set)
Suitable for sea shipping.
 
Attention:
1, For crystallization at low temperature:
If place the 518AB-T at the temperature of low then 15 degree for more than 24 hours, it will crystallization, but the it will disappear when the temperature rises.
2, In Autumn or Winter, the 518B-T can be warmed to transparent liquid after about 4 -12 hours. And use it after about 30 to 50minutes.If temperature is very low, can heat 518A-T together.
3, For irritability, some people may irritable to the 518AB-T for band operation, should wear disposable gloves during the operation and wash hands with soup after working; The workshop should be ventilate. And the air bumped by the vacuum machine should be output to the outside, not into the workshop.
4, The person with asthma should not operate 518AB-T

Storage, Shelf Life
1, Store at the temperature of 25°C, under the humidity of 70%. Avoid sunlight, high temperature or high humidity environment.
2, The feature of 518A -T maybe affected if contact with air, closed the 518A-T tightly after used. And 518A/B will absorb the moisture in the air easily, strictly avoid this happens. Better to use up it once opened.
3, This is non-hazardous chemical, can transported as normal chemicals.
4, Better to clean the water content of 518B-T by vacuum before use if humidity is higher than 70%



 
Prod Model: 518AB-T
Shelf Life: Six Months
The Mixing Ratio: 3:1
Bonding Function: Structural Adhesive
Application: Crystal Decoration
Material: Polyurethane
Classification: Room Curing
Main Agent Composition: Polyurethane Elastomer
Characteristic: Waterproof
Promoter Composition: Curing Agent
Composition: Organic Material
Morphology: Liquid
Color: Transparent
Shenzhen Jinhua Electronic Materials Co., Ltd engaged in epoxy resin adhesive and the second-processing of hardener agent since 2009, and now we are one of the most professional and competitive epoxy resin glue suppliers in China. Jinhua is professional in development, production and sale of epoxy resin AB glue with the factory area of 2000 square meter. All the equipments in Jinhua are comply to advanced international technology and standard, refer to the excellent formula in domestic and from abroad, and with the high property raw material imported from America, Japan and Germany, every step of the production are with strict test, all of our products have passed RoHS and REACH, make Jinhua to be the leading supplier in this field in China gained high reputation from our customers during the past years.

Jinhua mainly produce epoxy resin AB glue, crystal glue, potting glue, solar panel AB glue, decroation glue, surfboard coating glue, polishable glue and special adhesive, etc. With a very large range of applicaiton including crafts, decoration, fashion jewelry, sticker, promotional gifts, carbon fiber products coating, hard material adhesive, LED channel letters, LED strips potting, name plate, sign boards, solor panel, electronic potting, power encapsulation, molding filling and so on.

With the belief of "honest, harmony, creative, precisencess" and abundant experience, Jinhua people will always offer best solution to worldwide customers. With the principle of Service first, customer formost, we will be your most valuable and faithful cooperater.

We are looking forward to a mutual beneficial cooperation with the friends all over the world.

Welcome to Jinhua!

Send your message to this manufacturer

  • Shenzhen Jinhua Electronic Materials Co., Ltd.

More >

Other Products with This Manufacturers