The Micro-crystal Dermabrasion was designed by Italian Florence's Mattioli at first , until now had over 20 year's history.
This kind of technology only supplies to the dermatology expert and doctor at first uses,but more and more SPA House &
Beauty Saloon also gradually uses , it was called the best method of medical beauty .This method successfully has developed in Europe for several years , cures patient thousands of examples . and has obtained the extremely satisfactory effect.
Now we want to introduce the Diamond Dermabrasion , it is a creative improvement of the Micro-crystal Dermabrasion . The Diamond Dermabrasion provided a non-surgical skin refinish procedure by using sterile diamond heads to abrade or rub off the top skin layer , then Vacuuming out the particles along with any dirt and dead skin back up .This procedure removes skin debris,imperfections, blemishes , wrinkles and unwanted pigmentation on the skin . Moderate usage of Diamond Dermabrasion , accompany with skin products that penetrate through top skin layer that reach the dermis level , helps to replenish natural nutrients,restore cell activity , and promote skin health . The results after Micro Dermabrasion treatment is usually a healthy , glowing , beautiful skin.
Functions1.Diamond DermabrasionIt provided a non-surgical skin refinish procedure, by using sterile diamond heads to abrade or rub off the top skin layer, then vacuuming out the particles along with any dirt and dead skin back up.
Diamond Dermabrasion can treat:
- Aging and sun-damaged skin.
- Some types of acne scarring and acne.
- Altered pigmentation.
- Stretch marks.
- Fine lines.
- Enlarged and clogged pores.2. Skin Scrubber
- Smooth face wrinkles, improves the appearance and texture of skin.
- Improve blood circulation and metabolism.
- Clean off the dirtiness in the pores and make the skin become clean and fresh.
3. Ultrasonic Ultrasound with 2 Probes provided non-surgical Lifting, which utilizes sonic vibrations to reduce lines leaving the skin firm and smooth.
It can help the beautician apply the recover treatment after peeling treatment. 4. The hot & cold treatment function.
The cold treatment function is specially designed for cleaning down the skin after peeling. The skin is sensitive after peeling treatment, so the cold treatment procures is necessary. The hot treatment function is designed for accelerating the absorption of nutrition.
5.High Frequency
The high frequency electrotherapy is an important beauty instrument. It is through the glass electrode tube to produce high frequency current, and apply to the face, thus achieves the treatment result.It helps to calm the nerve and has analgesia function.It produces the ozone for sterilization, can help wound to heal and to restrain pores,accelerate blood circulation and improve metabolism for anti-aging, anti-wrinkle and tightening.
6.Rotary brush function 1.Make sure that the power switch is in the 'Off" postion.
2.Connect the Brush handle wire to Brush Handle
3.Connect the other end of wire to the machine.
4.Simply pick the desired accessory to be used for the reatment and insert it into the head of the gun making sure that the little pins line up o the slots on the head , allowing the piece to lock into place. Note, that if the accessory is not locked into place properly,it will not spin when any pressure is applied during use.
5.Press the "on/off button , and the machine attachment on the handle should begin to rotate.
6.To control the speed of the attachment rotation, adjust the knob on the left side of the face plate "Min/Max". Turing this knob will all the user to control the speed.
7.On the handle, there is a trigger which can be used to stop the attachment from rotating and also to reverse the direction of rotation . Make sure to Stop The rotation before reversing the direction to prevent damage to the handle.
7.Galvanic function 1.Connect the Negative & Positive ( Red ) wire into the machine using the plug and fasten the securing wng lo hold the plug in place.
2.Connect the Electrode handle to the end of the red wire.
3.Connect Black wire to the machine and connect the straight indifferent electrode to the end of the black wire for the client to hold. 4.Chose the electrode that best desired treatment and insert it into the electrode handle and tighten the secure head to prevent dropping the electrode.
5.Select the current you wish to use , "-" or "+".
6.To select the desired current , simply press the button on the front panel as drawn on the machine.
8.Vacuum/Spary function1.Start the machine: To turn on the machine , press the Vacuum/Spary power switch.
2.Connect the hoses to the machine, black for suction and white for spray .
3.Determine the choice of function and use the accessories accordingly , glass ventouses for suction and bottles for spray .
4.Depending on the function being used , disconnect the opposite hose for best results.
5.To increase vacuum or spray , turn the intensit control to the ight and to decrease the vacuum or sprat turn the control to the left.
19.When the machine is not in use make sure the power switch is off.
Factory and Reviews:We have strong R&D team and quality control system to make us become innovative and competitive in the market. We like to make friends and treat every relationship as strategic partnership. Our mission is to help clients grow their business.Trading Information:| OEM/ODM | Available, 1 order can be customized. |
| Incoterms | EXW, FOB, CIF |
| MOQ | 1 Piece |
| Payment | Trade Assurance, T/T, Paypal, Western Union, Money Gram |
| Payment Condition | Full Payment or 30% Deposit,70% before delivery |
| Packaging | Neutral Carton or Wooden Case. Inside: Foam |
| Shipment | By Sea, Air or Express dlivery |
| Warranty | 12 months. Any problems during warranty period, we will provide component replacement. |
| Technical Support | Lifelong |
Contact Us:Director: Anna Tang Telephone: 86-18573702034 
